Simple guide to viscosity and shore hardness

BJB Breakdown Viscosity and Shore Hardness

Below we have answered some frequently asked questions about viscosity, shore hardness and why they matter when choosing the right material.

What is viscosity? 

Simply, viscosity is how easily a material flows. If you were to pour water from a cup, then pour honey, you’ll notice a big difference in the flow rate or speed. The lower the viscosity (centipoise number) the easier the liquid flows.

Higher viscosity = Honey = 10,000+ cPs

Lower viscosity = Water = 1-1000 cPs

Does temperature affect viscosity? 

Yes, the viscosity of a material will change with temperature. If you look at a TDS (technical data sheet) the viscosity will be measured at a certain temperature, usually room temperature.

If you’re in a warm country or cold workshop, you need to take this into account!

Why does viscosity matter? 

Viscosity is crucial in casting as it determines how the material will flow into the cavity. For example, if you’re working with a material that has a fast work time then, depending on the viscosity, it may not fill the cavity in time.

  • Lower viscosities tend to suit detailed and complex shapes as they flow into the small details.
  • Medium viscosities suit general moulding and casting applications.
  • Higher viscosities suit brushed on applications and vertical surfaces as they stay in place.

Viscosity is also a factor when vacuum degassing a casting material as lower viscosity systems let go of trapped air easier than higher viscosity systems.

What is the shore hardness scale? 

The Shore Hardness Scale is the international standard for measuring the hardness of materials such as rubber and plastics. It is typically measured on a Shore A or D scale, but there is also Shore 00. The higher the number, the higher the hardness. Hardness meaning a materials resistance to surface penetration.

Shore 00 = Gel like materials

Shore A = Soft materials, stretchy

Shore D = Rigid, hard materials 

Why does shore hardness matter?

Shore hardness indicates the flexibility and conformability of a material so if you need a final product with some ‘give’ you’ll need a softer material (Shore A), while electronic housings for example need a more rigid material (Shore D).

Where can I find all this information?

The TDS will have both the hardness and the viscosity clearly stated.  

You’ll find viscosity under handling properties, and hardness will be in physical properties.

If the material is a two-part system, the viscosity will be shown for each part as well as mixed. Viscosity will be outlined as cPs, the lower this number, the closer to water the material will be.

Can you change the hardness or viscosity of a material?

Yes, using BJB softening and thickening agents you can change the material properties.

To soften BJB polyurethane elastomers, SC-22 can be added to adjust the hardness and elongation. If you’re working with BJB Skinflex material, SC-5 is designed specifically to lower the hardness.

BJB FiberThick is a thickening agent for increasing the viscosity of BJB polyurethanes, silicones, and epoxy systems.

Where do BJB materials fall?  

Here are just a few examples of the different BJB materials, they’re hardness, viscosity, and the sort of applications they’re suited to.

BJB Product Material Hardness Viscosity (mixed) Applications
TC-5050 Silicone 50 A 90,000 cps Mould making, pressure pads, encapsulation applications
TC-5150 Silicone 50 A 9100 cps Durable, flexible moulds
TC-5005 Silicone 5 A 15,250 cps Silicone skins, soft mouds, stop motion puppets
TC-1630 Polyurethane 80 D 1100 cps Silicone prosthetic moulds, composite tools, rigid parts
TC-812 Urethane 60 D 375 cps Patterns, mould cores, fishing lures
MD-50 Polyurethane 50 D 2500 cps Rollers, foundry tooling, high impact semi rigid parts
F-116 Polyurethane 15 A 1200 cps Parts and moulds, medical training models

Want a more in depth explanation? 

Read TECHSiL’s Shore Hardness and Viscosity Guide for more information.

Still unsure? 

Reach out to our Technical Team who can walk through your application and production process and help you find the best material.

Categories: Articles Foams, Polyurethanes, Silicones
© 2026 TECHSiL Ltd